1) Clean the surface that you will be applying the decal to. Be sure that the surface you are applying the decal to is dry and free of dust and dirt. The decal can be applied to any smooth dry surface like walls, wood, glass, mirrors, and metal. Minds Eye Vinyl is removable but most likely not reusable. Please allow a few weeks for freshly painted surfaces to dry completely before applying the decal.



2) Before applying you will need to lay the decal on a smooth surface with the paper backing (solid) side facing up. Rub a credit card on the back of the decal to make sure the transfer paper is attached.



3) Arrange your Minds Eye Vinyl Art on your surface using masking tape. DO NOT REMOVE THE BACKING UNTIL YOU ARE SATISFIED WITH YOUR LAYOUT.



4) Once you have positioned the decal on your surface apply a long strip of masking tape through the center of the decal attaching it to your surface.



5) Lift half of the graphic up and remove the backing liner. If some of the decal remains stuck to the white backing, stop. Rub the decal in that area and slowly continue peeling until the white backing is completely removed. Cut backing with scissors or utility knife and discard.







6) Holding the decal away from the wall use a credit card to press the vinyl to the wall working from the center out towards the edge.



7) Remove center tape and repeat with the other side.







8) Smooth the decal with your credit card removing any bubbles.





9) Once all of the bubbles have been removed slowly start peeling away the transfer tape. Make sure that the decal is sticking to the surface and not coming off with the transfer tape.